Dishwasher Repair in Salt Lake City

Not draining. Standing water at the end of a cycle usually means a blocked or failed drain pump, a clogged filter, or a kinked drain hose.

Leaking. Door seals wear out and flatten over time. Tub gaskets fail. A slow leak at the door base can soak the cabinet toe kick for months before it shows.

Dishes still dirty. Nine times out of ten this is spray arms. Hard water in this valley scales the holes shut, and the water can't reach the dishes. Sometimes it's the wash pump or a worn chopper.

Won't start, or stops mid-cycle. Door latches, control boards or thermal fuses.

Not drying. Heating elements or vent flaps, depending on the model. Some newer machines use condensation drying and simply need a rinse aid — worth checking before you call anyone.

Noisy. Wash pump bearings, or something hard in the sump.

Salt Lake Valley water is hard, and dishwashers suffer for it. Scale builds up in spray arms, inlet valves and heating elements. If your dishwasher has slowly gotten worse rather than failing suddenly, scaling is the likely cause.

Worth doing yourself: pull out the bottom rack and lift out the spray arm. If the holes are crusted over or blocked, soak it in white vinegar overnight. It's a free fix and it solves a surprising number of "dirty dishes" complaints.

Many kitchens across the valley have integrated or panel-ready dishwashers set into custom cabinetry. Pulling one out without marking the floor or cabinet faces takes care and the right technique. Our technicians do this routinely.